Wheel Alignment
& Tire Tools
Repair Stands Toolkits Cassette/Freewheel
Tools
Bearing Service
Tools for Hub/ B.B.
Brake Tools Chain Tools Cleaning &
Lubrication
Crank & Pedal
Tools
Frame Tools


Wheel & Tire Tools

Park TS-8 Truing Stand
Designed especially for the home mechanic, the TS-8 allows accurate wheel truing at an economical price.

  • Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability.
  • Made of high grade steel and it is precise enough to allow quick and efficient truing
  • Accepts wheels from 16” to 29”, with or without the tire mounted.
  • Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm). Dishing (centering) is performed by simply flipping the wheel in the stand.

Park TS-2 Professional Wheel Truing Stand

The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned

  • The Park Tool Professional Truing Stand is the stand to choose for heavy shop use. Accepts wheels from 16" to 28" with or without tire removed.
  • Both axle-holding uprights move simultaneously, always centering wheel hub with calipers, regardless of hub width.
  • Calipers and caliper arm are spring-loaded to prevent jamming with badly out-of-true wheels. Made of heavy chrome plated steel with nylon bushings at pivot points.
  • Can be bench-mounted or vise-held. The standard of the industry. If a forward or backward tilt is desired, use with Truing Stand Tilting Base (TSB-2) shown below. For precision work, the TS-2 should be used with the WAG-4 Professional Wheel Alignment Gauge.
  • Opens up to accept hubs 150mm wide.

  • SOLD OUT

Park TS-5 Wheel Truing Stand Attachment

  • The TS-5 turns any PRS-5, PCS-1, or PCS -4 made after 6/96 into a convenient wheel truing stand.
  • Easy to install and light in weight, the compact TS-5 allows accurate truing of 16" to 29" wheels.
  • Wheel dishing (centering the rim between the hub’s locknuts) is performed by flipping the wheel in the stand, or, by using the TS-5 with a WAG-3 or WAG-4 Wheel Dishing Tool (not included).
  • Perfect for the race or home mechanic.

  • SOLD OUT

Park WAG-3 & WAG-4 Wheel Alignment Gauge
Two styles of Wheel Dishing Gauge available from Park Tools

  • The WAG-3 accurately checks the dish, or offset, on all 26", 27", and 700C wheels. Measurements are taken comparing one side of the wheel to the other to determine if the rim is in the center of the hub. Easily disassembles to fit into most tool boxes. Perfect for the race or home mechanic.


  • AWAG-4 -Wheel Alignment Gauge
    For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or “dished”. To check this, and to make precision adjustments, a wheel alignment gauge (also called a “dishing tool”) is a must. The WAG-4 allows easy checking of the dish on road, mountain, or BMX wheels from 16” to 29”. It works with any hub width and its innovative design even allows it to be accurately used with the tire still on the wheel. An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.


  • SOLD OUT

Park TM-1 Spoke Tension Meter
The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned

  • The TM-1 Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel.
  • Easy to use and priced affordably, the TM-1 works on nearly any bicycle spoke—no matter what the diameter, material, or shape.
  • Not just for the experienced mechanic, the TM-1 is for anyone building or truing wheels, diagnosing wheel problems, or assembling new bikes. It’s a tool that belongs on every workbench.

Park Triple Spoke Wrench SW-7


  • A quality tool - made of tool steel with three most popular nipple sizes - equal to SW-0, 1, 2
  • Opposite each nipple jaw, a convenient spoke guide centers the jaws for easy insertion and zero nipple damage
  • Machined precisely and nickel plated for years of service
  • Designed for the home mechanic.

Park Spoke Wrench SW Series


  • Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service.
  • Park Tool Spoke Wrenches are vinyl coated in one of four colors indicating the size at a glance.
  • SW-1 Green, SW-2 Red, SW-3 Blue
  • Park Tool Spoke Wrenches are marked “Park Tool USA.”

Park TL-1 Tire Lever Set
This levers are a must, never use screwdrivers or metal items to pry off tires


  • Sold in sets of three
  • Park Tool Tire Levers are made of nylon to ensure long life and damage-free operation.
  • The unique design of the TL-1 actually lifts the tire away from the rim and keeps the tube from being pinched. .




Links | Bike Buying Guide | Ontario Bike Trails | Site Map